To get access to FRITZ BOX Fon Annex A router, you need the login IP address of your router, the username, and password.
You can find these information in FRITZ BOX Fon Annex A router manual. But if you lost it, then you can use the quick guide below.
Login to the FRITZ BOX Fon Annex A Router
The FRITZ BOX Fon Annex A has a web interface for configuration. You can use any web browser to log in to the FRITZ BOX Fon Annex A router.
Put the Login IP Address of your FRITZ BOX Fon Annex A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your FRITZ BOX Fon Annex A login infomation.
Default login data for FRITZ BOX Fon Annex A
You need to know the username and password to log in to your FRITZ BOX Fon Annex A router. We listed below.
|Model||Ip||Username & Password|
|FRITZ BOX Fon Annex A||192.168.178.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other FRITZ BOX Fon Annex A Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of FRITZ BOX Fon Annex A Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to FRITZ BOX Fon Annex A router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the FRITZ BOX Fon Annex A Router To Default Settings?
If you still can not access the router’s setup page, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change FRITZ BOX Fon Annex A Default Wifi Name (SSID)
By default, some FRITZ BOX Fon Annex A routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for FRITZ BOX Fon Annex A
MAC filtering allows you to restrict access to your FRITZ BOX Fon Annex A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your FRITZ BOX Fon Annex A router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.178.1 on the address.
- Enter the username and password for FRITZ BOX Fon Annex A router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.