Default Password for Genexis Platinum-7840 Router

To get access to Genexis Platinum-7840 router, you need the login IP address of your router, the username, and password.

You can find these data in Genexis Platinum-7840 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Genexis Platinum-7840 Router

The Genexis Platinum-7840 has a web interface for configuration. You can use any web browser to log in to the Genexis Platinum-7840 router.

Put the Internal IP Address of your Genexis Platinum-7840 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Genexis Platinum-7840 login data.

Default login data for Genexis Platinum-7840

You need to know the username and password to log in to your Genexis Platinum-7840 router. We listed below.

Model Ip Username & Password
Genexis Platinum-7840 192.168.1.254 Username:admin/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Genexis Platinum-7840 Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Genexis Platinum-7840 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Genexis Platinum-7840 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Genexis Platinum-7840 Router To Default Settings?

If you can not get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Genexis Platinum-7840 Default Wifi Name (SSID)

By default, some Genexis Platinum-7840 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Genexis Platinum-7840

MAC filtering allows you to restrict access to your Genexis Platinum-7840 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Genexis Platinum-7840 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Genexis Platinum-7840 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

4 + 13 =