Default Password for Get Get Box II Router

To get access to Get Get Box II router, you need the login IP address of your router, the username, and password.

You can find these info in Get Get Box II router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Get Get Box II Router

The Get Get Box II has a web interface for configuration. You can use any web browser to log in to the Get Get Box II router.

Put the IP Address(without “http://” or “https://”) of your Get Get Box II in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Get Get Box II login data.

Default login data for Get Get Box II

You need to know the username and password to log in to your Get Get Box II router. We listed below.

Model Ip Username & Password
Get Get Box II 192.168.1.102 Username:home/ Password:home

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Get Get Box II Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Get Get Box II Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Get Get Box II router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Get Get Box II Router To Default Settings?

If you still can’t access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Get Get Box II Default Wifi Name (SSID)

By default, some Get Get Box II routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Get Get Box II

MAC filtering allows you to restrict access to your Get Get Box II router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Get Get Box II router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.102 on the address.
  2. Enter the username and password for Get Get Box II router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

4 − three =