To get access to Green Packet GP-2101 MTN router, you need the login IP address of your router, the username, and password.
You can find these information in Green Packet GP-2101 MTN router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Green Packet GP-2101 MTN Router
The Green Packet GP-2101 MTN has a web interface for configuration. You can use any web browser to log in to the Green Packet GP-2101 MTN router.
Put the IP Address(without “http://” or “https://”) of your Green Packet GP-2101 MTN in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Green Packet GP-2101 MTN login username & password.
Default login data for Green Packet GP-2101 MTN
You need to know the username and password to log in to your Green Packet GP-2101 MTN router. We listed below.
|Model||Ip||Username & Password|
|Green Packet GP-2101 MTN||192.168.1.1||Username:admin/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Green Packet GP-2101 MTN Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of Green Packet GP-2101 MTN Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Green Packet GP-2101 MTN router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Green Packet GP-2101 MTN Router To Default Settings?
If you can not get logged in, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Green Packet GP-2101 MTN Default Wifi Name (SSID)
By default, some Green Packet GP-2101 MTN routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Green Packet GP-2101 MTN
MAC filtering allows you to restrict access to your Green Packet GP-2101 MTN router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Green Packet GP-2101 MTN router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Green Packet GP-2101 MTN router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.