Default Password for Hawking HD45R Router

To get access to Hawking HD45R router, you need the login IP address of your router, the username, and password.

You can find these data in Hawking HD45R router manual. But if you lost it, then you can use the quick guide below.

Login to the Hawking HD45R Router

The Hawking HD45R has a web interface for configuration. You can use any web browser to log in to the Hawking HD45R router.

Put the Login IP Address of your Hawking HD45R in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Hawking HD45R login infomation.

Default login data for Hawking HD45R

You need to know the username and password to log in to your Hawking HD45R router. We listed below.

Model Ip Username & Password
Hawking HD45R 192.168.1.254 Username:admin/ Password:1234

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Hawking HD45R Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Hawking HD45R Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Hawking HD45R router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Hawking HD45R Router To Default Settings?

If you still can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Hawking HD45R Default Wifi Name (SSID)

By default, some Hawking HD45R routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Hawking HD45R

MAC filtering allows you to restrict access to your Hawking HD45R router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Hawking HD45R router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Hawking HD45R router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

five + sixteen =