Default Password for Huawei B68A Router

To get access to Huawei B68A router, you need the login IP address of your router, the username, and password.

You can find these information in Huawei B68A router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Huawei B68A Router

The Huawei B68A has a web interface for configuration. You can use any web browser to log in to the Huawei B68A router.

Put the Internal IP Address of your Huawei B68A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Huawei B68A login infomation.

Default login data for Huawei B68A

You need to know the username and password to log in to your Huawei B68A router. We listed below.

Model Ip Username & Password
Huawei B68A 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Huawei B68A Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Huawei B68A Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Huawei B68A router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Huawei B68A Router To Default Settings?

If you still can not login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Huawei B68A Default Wifi Name (SSID)

By default, some Huawei B68A routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Huawei B68A

MAC filtering allows you to restrict access to your Huawei B68A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Huawei B68A router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Huawei B68A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

10 + twenty =