Default Password for Huawei D105 Router

To get access to Huawei D105 router, you need the login IP address of your router, the username, and password.

You can find these information in Huawei D105 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Huawei D105 Router

The Huawei D105 has a web interface for configuration. You can use any web browser to log in to the Huawei D105 router.

Put the Internal IP Address of your Huawei D105 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Huawei D105 login username & password.

Default login data for Huawei D105

You need to know the username and password to log in to your Huawei D105 router. We listed below.

Model Ip Username & Password
Huawei D105 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Huawei D105 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Huawei D105 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Huawei D105 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Huawei D105 Router To Default Settings?

If you can not get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Huawei D105 Default Wifi Name (SSID)

By default, some Huawei D105 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Huawei D105

MAC filtering allows you to restrict access to your Huawei D105 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Huawei D105 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Huawei D105 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

seven − two =