Default Password for Huawei EchoLife HG520b Telmex Router

To get access to Huawei EchoLife HG520b Telmex router, you need the login IP address of your router, the username, and password.

You can find these information in Huawei EchoLife HG520b Telmex router manual. But if you lost it, then you can use the quick guide below.

Login to the Huawei EchoLife HG520b Telmex Router

The Huawei EchoLife HG520b Telmex has a web interface for configuration. You can use any web browser to log in to the Huawei EchoLife HG520b Telmex router.

Put the Internal IP Address of your Huawei EchoLife HG520b Telmex in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Huawei EchoLife HG520b Telmex login infomation.

Default login data for Huawei EchoLife HG520b Telmex

You need to know the username and password to log in to your Huawei EchoLife HG520b Telmex router. We listed below.

Model Ip Username & Password
Huawei EchoLife HG520b Telmex 192.168.1.254 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Huawei EchoLife HG520b Telmex Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Huawei EchoLife HG520b Telmex Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Huawei EchoLife HG520b Telmex router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Huawei EchoLife HG520b Telmex Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Huawei EchoLife HG520b Telmex Default Wifi Name (SSID)

By default, some Huawei EchoLife HG520b Telmex routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Huawei EchoLife HG520b Telmex

MAC filtering allows you to restrict access to your Huawei EchoLife HG520b Telmex router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Huawei EchoLife HG520b Telmex router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Huawei EchoLife HG520b Telmex router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

4 × one =