Default Password for Huawei EchoLife HG520c Router

To get access to Huawei EchoLife HG520c router, you need the login IP address of your router, the username, and password.

You can find these info in Huawei EchoLife HG520c router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Huawei EchoLife HG520c Router

The Huawei EchoLife HG520c has a web interface for configuration. You can use any web browser to log in to the Huawei EchoLife HG520c router.

Put the Internal IP Address of your Huawei EchoLife HG520c in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Huawei EchoLife HG520c login username & password.

Default login data for Huawei EchoLife HG520c

You need to know the username and password to log in to your Huawei EchoLife HG520c router. We listed below.

Model Ip Username & Password
Huawei EchoLife HG520c 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Huawei EchoLife HG520c Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Huawei EchoLife HG520c Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Huawei EchoLife HG520c router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Huawei EchoLife HG520c Router To Default Settings?

If you still can’t access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Huawei EchoLife HG520c Default Wifi Name (SSID)

By default, some Huawei EchoLife HG520c routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Huawei EchoLife HG520c

MAC filtering allows you to restrict access to your Huawei EchoLife HG520c router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Huawei EchoLife HG520c router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Huawei EchoLife HG520c router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

9 − 3 =