Default Password for Huawei HG552e Router

To get access to Huawei HG552e router, you need the login IP address of your router, the username, and password.

You can find these data in Huawei HG552e router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Huawei HG552e Router

The Huawei HG552e has a web interface for configuration. You can use any web browser to log in to the Huawei HG552e router.

Put the Internal IP Address of your Huawei HG552e in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Huawei HG552e login username & password.

Default login data for Huawei HG552e

You need to know the username and password to log in to your Huawei HG552e router. We listed below.

Model Ip Username & Password
Huawei HG552e 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Huawei HG552e Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Huawei HG552e Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Huawei HG552e router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Huawei HG552e Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Huawei HG552e Default Wifi Name (SSID)

By default, some Huawei HG552e routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Huawei HG552e

MAC filtering allows you to restrict access to your Huawei HG552e router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Huawei HG552e router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Huawei HG552e router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

1 × two =