Default Password for Huawei HG659 Dodo Router

To get access to Huawei HG659 Dodo router, you need the login IP address of your router, the username, and password.

You can find these information in Huawei HG659 Dodo router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Huawei HG659 Dodo Router

The Huawei HG659 Dodo has a web interface for configuration. You can use any web browser to log in to the Huawei HG659 Dodo router.

Put the Login IP Address of your Huawei HG659 Dodo in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Huawei HG659 Dodo login data.

Default login data for Huawei HG659 Dodo

You need to know the username and password to log in to your Huawei HG659 Dodo router. We listed below.

Model Ip Username & Password
Huawei HG659 Dodo 192.168.1.1 Username:user/ Password:HuaweiUser

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Huawei HG659 Dodo Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Huawei HG659 Dodo Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Huawei HG659 Dodo router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Huawei HG659 Dodo Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Huawei HG659 Dodo Default Wifi Name (SSID)

By default, some Huawei HG659 Dodo routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Huawei HG659 Dodo

MAC filtering allows you to restrict access to your Huawei HG659 Dodo router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Huawei HG659 Dodo router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Huawei HG659 Dodo router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

ten + 12 =