Default Password for Humax HG100R-L4 Router

To get access to Humax HG100R-L4 router, you need the login IP address of your router, the username, and password.

You can find these information in Humax HG100R-L4 router manual. But if you lost it, then you can use the quick guide below.

Login to the Humax HG100R-L4 Router

The Humax HG100R-L4 has a web interface for configuration. You can use any web browser to log in to the Humax HG100R-L4 router.

Put the Login IP Address of your Humax HG100R-L4 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Humax HG100R-L4 login username & password.

Default login data for Humax HG100R-L4

You need to know the username and password to log in to your Humax HG100R-L4 router. We listed below.

Model Ip Username & Password
Humax HG100R-L4 Username:printed on router/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Humax HG100R-L4 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Humax HG100R-L4 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Humax HG100R-L4 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Humax HG100R-L4 Router To Default Settings?

If you can’t access the router’s setup page, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Humax HG100R-L4 Default Wifi Name (SSID)

By default, some Humax HG100R-L4 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Humax HG100R-L4

MAC filtering allows you to restrict access to your Humax HG100R-L4 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Humax HG100R-L4 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Humax HG100R-L4 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

nineteen + 3 =