Default Password for iBall iB-WRA150N2 Router

To get access to iBall iB-WRA150N2 router, you need the login IP address of your router, the username, and password.

You can find these information in iBall iB-WRA150N2 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the iBall iB-WRA150N2 Router

The iBall iB-WRA150N2 has a web interface for configuration. You can use any web browser to log in to the iBall iB-WRA150N2 router.

Put the Login IP Address of your iBall iB-WRA150N2 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your iBall iB-WRA150N2 login infomation.

Default login data for iBall iB-WRA150N2

You need to know the username and password to log in to your iBall iB-WRA150N2 router. We listed below.

Model Ip Username & Password
iBall iB-WRA150N2 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other iBall iB-WRA150N2 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of iBall iB-WRA150N2 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to iBall iB-WRA150N2 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the iBall iB-WRA150N2 Router To Default Settings?

If you still can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change iBall iB-WRA150N2 Default Wifi Name (SSID)

By default, some iBall iB-WRA150N2 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for iBall iB-WRA150N2

MAC filtering allows you to restrict access to your iBall iB-WRA150N2 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your iBall iB-WRA150N2 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for iBall iB-WRA150N2 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

four × 3 =