Default Password for Inteno DG150 Router

To get access to Inteno DG150 router, you need the login IP address of your router, the username, and password.

You can find these info in Inteno DG150 router manual. But if you lost it, then you can use the quick guide below.

Login to the Inteno DG150 Router

The Inteno DG150 has a web interface for configuration. You can use any web browser to log in to the Inteno DG150 router.

Put the Internal IP Address of your Inteno DG150 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Inteno DG150 login infomation.

Default login data for Inteno DG150

You need to know the username and password to log in to your Inteno DG150 router. We listed below.

Model Ip Username & Password
Inteno DG150 Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Inteno DG150 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Inteno DG150 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Inteno DG150 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Inteno DG150 Router To Default Settings?

If you still can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Inteno DG150 Default Wifi Name (SSID)

By default, some Inteno DG150 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Inteno DG150

MAC filtering allows you to restrict access to your Inteno DG150 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Inteno DG150 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Inteno DG150 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

twenty − 6 =