Default Password for Iskon A1521-I Router

To get access to Iskon A1521-I router, you need the login IP address of your router, the username, and password.

You can find these data in Iskon A1521-I router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Iskon A1521-I Router

The Iskon A1521-I has a web interface for configuration. You can use any web browser to log in to the Iskon A1521-I router.

Put the IP Address(without “http://” or “https://”) of your Iskon A1521-I in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Iskon A1521-I login username & password.

Default login data for Iskon A1521-I

You need to know the username and password to log in to your Iskon A1521-I router. We listed below.

Model Ip Username & Password
Iskon A1521-I 192.168.5.1 Username:Administrator/ Password:Administrator

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Iskon A1521-I Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Iskon A1521-I Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Iskon A1521-I router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Iskon A1521-I Router To Default Settings?

If you can not get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Iskon A1521-I Default Wifi Name (SSID)

By default, some Iskon A1521-I routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Iskon A1521-I

MAC filtering allows you to restrict access to your Iskon A1521-I router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Iskon A1521-I router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.5.1 on the address.
  2. Enter the username and password for Iskon A1521-I router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

eleven − 8 =