Default Password for Level One FBR 1161 Router

To get access to Level One FBR 1161 router, you need the login IP address of your router, the username, and password.

You can find these info in Level One FBR 1161 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Level One FBR 1161 Router

The Level One FBR 1161 has a web interface for configuration. You can use any web browser to log in to the Level One FBR 1161 router.

Put the Login IP Address of your Level One FBR 1161 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Level One FBR 1161 login username & password.

Default login data for Level One FBR 1161

You need to know the username and password to log in to your Level One FBR 1161 router. We listed below.

Model Ip Username & Password
Level One FBR 1161 Username:admim/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Level One FBR 1161 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Level One FBR 1161 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Level One FBR 1161 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Level One FBR 1161 Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Level One FBR 1161 Default Wifi Name (SSID)

By default, some Level One FBR 1161 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Level One FBR 1161

MAC filtering allows you to restrict access to your Level One FBR 1161 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Level One FBR 1161 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Level One FBR 1161 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

twenty − nineteen =