Default Password for Linksys BEFDSR41W Router

To get access to Linksys BEFDSR41W router, you need the login IP address of your router, the username, and password.

You can find these info in Linksys BEFDSR41W router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Linksys BEFDSR41W Router

The Linksys BEFDSR41W has a web interface for configuration. You can use any web browser to log in to the Linksys BEFDSR41W router.

Put the Internal IP Address of your Linksys BEFDSR41W in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys BEFDSR41W login infomation.

Default login data for Linksys BEFDSR41W

You need to know the username and password to log in to your Linksys BEFDSR41W router. We listed below.

Model Ip Username & Password
Linksys BEFDSR41W Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Linksys BEFDSR41W Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Linksys BEFDSR41W Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Linksys BEFDSR41W router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Linksys BEFDSR41W Router To Default Settings?

If you still can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Linksys BEFDSR41W Default Wifi Name (SSID)

By default, some Linksys BEFDSR41W routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Linksys BEFDSR41W

MAC filtering allows you to restrict access to your Linksys BEFDSR41W router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys BEFDSR41W router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Linksys BEFDSR41W router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

seventeen − 4 =