Default Password for Linksys BEFSX41 Router

To get access to Linksys BEFSX41 router, you need the login IP address of your router, the username, and password.

You can find these information in Linksys BEFSX41 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Linksys BEFSX41 Router

The Linksys BEFSX41 has a web interface for configuration. You can use any web browser to log in to the Linksys BEFSX41 router.

Put the Login IP Address of your Linksys BEFSX41 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys BEFSX41 login username & password.

Default login data for Linksys BEFSX41

You need to know the username and password to log in to your Linksys BEFSX41 router. We listed below.

Model Ip Username & Password
Linksys BEFSX41 192.168.1.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Linksys BEFSX41 Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Linksys BEFSX41 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Linksys BEFSX41 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Linksys BEFSX41 Router To Default Settings?

If you still can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Linksys BEFSX41 Default Wifi Name (SSID)

By default, some Linksys BEFSX41 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Linksys BEFSX41

MAC filtering allows you to restrict access to your Linksys BEFSX41 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys BEFSX41 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Linksys BEFSX41 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

15 − 5 =