To get access to Linksys RT41P2 AT router, you need the login IP address of your router, the username, and password.
You can find these data in Linksys RT41P2 AT router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Linksys RT41P2 AT Router
The Linksys RT41P2 AT has a web interface for configuration. You can use any web browser to log in to the Linksys RT41P2 AT router.
Put the Login IP Address of your Linksys RT41P2 AT in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys RT41P2 AT login infomation.
Default login data for Linksys RT41P2 AT
You need to know the username and password to log in to your Linksys RT41P2 AT router. We listed below.
|Model||Ip||Username & Password|
|Linksys RT41P2 AT||192.168.1.1||Username:(none)/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Linksys RT41P2 AT Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Linksys RT41P2 AT Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Linksys RT41P2 AT router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Linksys RT41P2 AT Router To Default Settings?
If you still can not login the setup page of router, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Linksys RT41P2 AT Default Wifi Name (SSID)
By default, some Linksys RT41P2 AT routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Linksys RT41P2 AT
MAC filtering allows you to restrict access to your Linksys RT41P2 AT router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys RT41P2 AT router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Linksys RT41P2 AT router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.