Default Password for Linksys SRW224 Router

To get access to Linksys SRW224 router, you need the login IP address of your router, the username, and password.

You can find these information in Linksys SRW224 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Linksys SRW224 Router

The Linksys SRW224 has a web interface for configuration. You can use any web browser to log in to the Linksys SRW224 router.

Put the Login IP Address of your Linksys SRW224 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys SRW224 login username & password.

Default login data for Linksys SRW224

You need to know the username and password to log in to your Linksys SRW224 router. We listed below.

Model Ip Username & Password
Linksys SRW224 192.168.1.254 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Linksys SRW224 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Linksys SRW224 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Linksys SRW224 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Linksys SRW224 Router To Default Settings?

If you can’t get logged in, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Linksys SRW224 Default Wifi Name (SSID)

By default, some Linksys SRW224 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Linksys SRW224

MAC filtering allows you to restrict access to your Linksys SRW224 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys SRW224 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Linksys SRW224 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

  2. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

20 + fifteen =