To get access to Linksys WGA54AG router, you need the login IP address of your router, the username, and password.
You can find these data in Linksys WGA54AG router manual. But if you lost it, then you can use the quick guide below.
Login to the Linksys WGA54AG Router
The Linksys WGA54AG has a web interface for configuration. You can use any web browser to log in to the Linksys WGA54AG router.
Put the IP Address(without “http://” or “https://”) of your Linksys WGA54AG in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys WGA54AG login data.
Default login data for Linksys WGA54AG
You need to know the username and password to log in to your Linksys WGA54AG router. We listed below.
|Model||Ip||Username & Password|
|Linksys WGA54AG||192.168.1.250||Username:(none)/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Linksys WGA54AG Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Linksys WGA54AG Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Linksys WGA54AG router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the Linksys WGA54AG Router To Default Settings?
If you can not login the setup page of router, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Linksys WGA54AG Default Wifi Name (SSID)
By default, some Linksys WGA54AG routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Linksys WGA54AG
MAC filtering allows you to restrict access to your Linksys WGA54AG router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys WGA54AG router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.250 on the address.
- Enter the username and password for Linksys WGA54AG router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.