To get access to Linksys WRT310N-ES router, you need the login IP address of your router, the username, and password.
You can find these data in Linksys WRT310N-ES router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Linksys WRT310N-ES Router
The Linksys WRT310N-ES has a web interface for configuration. You can use any web browser to log in to the Linksys WRT310N-ES router.
Put the Internal IP Address of your Linksys WRT310N-ES in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys WRT310N-ES login data.
Default login data for Linksys WRT310N-ES
You need to know the username and password to log in to your Linksys WRT310N-ES router. We listed below.
|Model||Ip||Username & Password|
|Linksys WRT310N-ES||192.168.1.1||Username:(none)/ Password:admin|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Linksys WRT310N-ES Login Problems
If you can not get a login to your router, here are a few possible solutions you can try.
The Password of Linksys WRT310N-ES Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Linksys WRT310N-ES router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Linksys WRT310N-ES Router To Default Settings?
If you still can’t access the router’s setup page, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Linksys WRT310N-ES Default Wifi Name (SSID)
By default, some Linksys WRT310N-ES routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Linksys WRT310N-ES
MAC filtering allows you to restrict access to your Linksys WRT310N-ES router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys WRT310N-ES router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Linksys WRT310N-ES router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.