Default Password for Linksys WRT320N Router

To get access to Linksys WRT320N router, you need the login IP address of your router, the username, and password.

You can find these data in Linksys WRT320N router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Linksys WRT320N Router

The Linksys WRT320N has a web interface for configuration. You can use any web browser to log in to the Linksys WRT320N router.

Put the IP Address(without “http://” or “https://”) of your Linksys WRT320N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys WRT320N login data.

Default login data for Linksys WRT320N

You need to know the username and password to log in to your Linksys WRT320N router. We listed below.

Model Ip Username & Password
Linksys WRT320N 192.168.1.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Linksys WRT320N Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Linksys WRT320N Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Linksys WRT320N router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Linksys WRT320N Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Linksys WRT320N Default Wifi Name (SSID)

By default, some Linksys WRT320N routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Linksys WRT320N

MAC filtering allows you to restrict access to your Linksys WRT320N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys WRT320N router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Linksys WRT320N router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

four × one =