Default Password for Linksys WVC54G Router

To get access to Linksys WVC54G router, you need the login IP address of your router, the username, and password.

You can find these data in Linksys WVC54G router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Linksys WVC54G Router

The Linksys WVC54G has a web interface for configuration. You can use any web browser to log in to the Linksys WVC54G router.

Put the IP Address(without “http://” or “https://”) of your Linksys WVC54G in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Linksys WVC54G login data.

Default login data for Linksys WVC54G

You need to know the username and password to log in to your Linksys WVC54G router. We listed below.

Model Ip Username & Password
Linksys WVC54G 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Linksys WVC54G Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Linksys WVC54G Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Linksys WVC54G router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Linksys WVC54G Router To Default Settings?

If you can’t get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Linksys WVC54G Default Wifi Name (SSID)

By default, some Linksys WVC54G routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Linksys WVC54G

MAC filtering allows you to restrict access to your Linksys WVC54G router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Linksys WVC54G router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Linksys WVC54G router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

three × three =