Default Password for MikroTik RouterOS v6-34 Router

To get access to MikroTik RouterOS v6-34 router, you need the login IP address of your router, the username, and password.

You can find these information in MikroTik RouterOS v6-34 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the MikroTik RouterOS v6-34 Router

The MikroTik RouterOS v6-34 has a web interface for configuration. You can use any web browser to log in to the MikroTik RouterOS v6-34 router.

Put the Login IP Address of your MikroTik RouterOS v6-34 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your MikroTik RouterOS v6-34 login infomation.

Default login data for MikroTik RouterOS v6-34

You need to know the username and password to log in to your MikroTik RouterOS v6-34 router. We listed below.

Model Ip Username & Password
MikroTik RouterOS v6-34 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other MikroTik RouterOS v6-34 Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of MikroTik RouterOS v6-34 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to MikroTik RouterOS v6-34 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the MikroTik RouterOS v6-34 Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change MikroTik RouterOS v6-34 Default Wifi Name (SSID)

By default, some MikroTik RouterOS v6-34 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for MikroTik RouterOS v6-34

MAC filtering allows you to restrict access to your MikroTik RouterOS v6-34 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your MikroTik RouterOS v6-34 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for MikroTik RouterOS v6-34 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

10 − ten =