To get access to Mitrastar GPT-2541GNAC Movistar router, you need the login IP address of your router, the username, and password.
You can find these information in Mitrastar GPT-2541GNAC Movistar router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Mitrastar GPT-2541GNAC Movistar Router
The Mitrastar GPT-2541GNAC Movistar has a web interface for configuration. You can use any web browser to log in to the Mitrastar GPT-2541GNAC Movistar router.
Put the Internal IP Address of your Mitrastar GPT-2541GNAC Movistar in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Mitrastar GPT-2541GNAC Movistar login data.
Default login data for Mitrastar GPT-2541GNAC Movistar
You need to know the username and password to log in to your Mitrastar GPT-2541GNAC Movistar router. We listed below.
|Model||Ip||Username & Password|
|Mitrastar GPT-2541GNAC Movistar||192.168.1.1||Username:(none)/ Password:printed on router|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Mitrastar GPT-2541GNAC Movistar Login Problems
If you can not get a login to your router, here are a few possible solutions you can try.
The Password of Mitrastar GPT-2541GNAC Movistar Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Mitrastar GPT-2541GNAC Movistar router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Mitrastar GPT-2541GNAC Movistar Router To Default Settings?
If you can’t access the router’s setup page, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Mitrastar GPT-2541GNAC Movistar Default Wifi Name (SSID)
By default, some Mitrastar GPT-2541GNAC Movistar routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Mitrastar GPT-2541GNAC Movistar
MAC filtering allows you to restrict access to your Mitrastar GPT-2541GNAC Movistar router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Mitrastar GPT-2541GNAC Movistar router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Mitrastar GPT-2541GNAC Movistar router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.