Default Password for Motorola 3347 Router

To get access to Motorola 3347 router, you need the login IP address of your router, the username, and password.

You can find these data in Motorola 3347 router manual. But if you lost it, then you can use the quick guide below.

Login to the Motorola 3347 Router

The Motorola 3347 has a web interface for configuration. You can use any web browser to log in to the Motorola 3347 router.

Put the Internal IP Address of your Motorola 3347 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Motorola 3347 login username & password.

Default login data for Motorola 3347

You need to know the username and password to log in to your Motorola 3347 router. We listed below.

Model Ip Username & Password
Motorola 3347 192.168.0.1 Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Motorola 3347 Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Motorola 3347 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Motorola 3347 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Motorola 3347 Router To Default Settings?

If you still can’t get logged in, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Motorola 3347 Default Wifi Name (SSID)

By default, some Motorola 3347 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Motorola 3347

MAC filtering allows you to restrict access to your Motorola 3347 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Motorola 3347 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Motorola 3347 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

eleven − 10 =