Default Password for Motorola MG7315 Router

To get access to Motorola MG7315 router, you need the login IP address of your router, the username, and password.

You can find these info in Motorola MG7315 router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Motorola MG7315 Router

The Motorola MG7315 has a web interface for configuration. You can use any web browser to log in to the Motorola MG7315 router.

Put the Login IP Address of your Motorola MG7315 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Motorola MG7315 login username & password.

Default login data for Motorola MG7315

You need to know the username and password to log in to your Motorola MG7315 router. We listed below.

Model Ip Username & Password
Motorola MG7315 192.168.0.1 Username:admin/ Password:motorola

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Motorola MG7315 Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Motorola MG7315 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Motorola MG7315 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Motorola MG7315 Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Motorola MG7315 Default Wifi Name (SSID)

By default, some Motorola MG7315 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Motorola MG7315

MAC filtering allows you to restrict access to your Motorola MG7315 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Motorola MG7315 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Motorola MG7315 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

5 × 3 =