Default Password for Motorola SBG6782-AC Router

To get access to Motorola SBG6782-AC router, you need the login IP address of your router, the username, and password.

You can find these data in Motorola SBG6782-AC router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Motorola SBG6782-AC Router

The Motorola SBG6782-AC has a web interface for configuration. You can use any web browser to log in to the Motorola SBG6782-AC router.

Put the Internal IP Address of your Motorola SBG6782-AC in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Motorola SBG6782-AC login username & password.

Default login data for Motorola SBG6782-AC

You need to know the username and password to log in to your Motorola SBG6782-AC router. We listed below.

Model Ip Username & Password
Motorola SBG6782-AC Username:admin/ Password:Motorola

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Motorola SBG6782-AC Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Motorola SBG6782-AC Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Motorola SBG6782-AC router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Motorola SBG6782-AC Router To Default Settings?

If you can’t access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Motorola SBG6782-AC Default Wifi Name (SSID)

By default, some Motorola SBG6782-AC routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Motorola SBG6782-AC

MAC filtering allows you to restrict access to your Motorola SBG6782-AC router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Motorola SBG6782-AC router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Motorola SBG6782-AC router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

nineteen − 4 =