Default Password for MSI RG54SE Router

To get access to MSI RG54SE router, you need the login IP address of your router, the username, and password.

You can find these data in MSI RG54SE router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the MSI RG54SE Router

The MSI RG54SE has a web interface for configuration. You can use any web browser to log in to the MSI RG54SE router.

Put the IP Address(without “http://” or “https://”) of your MSI RG54SE in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your MSI RG54SE login username & password.

Default login data for MSI RG54SE

You need to know the username and password to log in to your MSI RG54SE router. We listed below.

Model Ip Username & Password
MSI RG54SE 192.168.1.254 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other MSI RG54SE Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of MSI RG54SE Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to MSI RG54SE router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the MSI RG54SE Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change MSI RG54SE Default Wifi Name (SSID)

By default, some MSI RG54SE routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for MSI RG54SE

MAC filtering allows you to restrict access to your MSI RG54SE router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your MSI RG54SE router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for MSI RG54SE router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

three × one =