Default Password for MTN ShareLink Router

To get access to MTN ShareLink router, you need the login IP address of your router, the username, and password.

You can find these information in MTN ShareLink router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the MTN ShareLink Router

The MTN ShareLink has a web interface for configuration. You can use any web browser to log in to the MTN ShareLink router.

Put the IP Address(without “http://” or “https://”) of your MTN ShareLink in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your MTN ShareLink login username & password.

Default login data for MTN ShareLink

You need to know the username and password to log in to your MTN ShareLink router. We listed below.

Model Ip Username & Password
MTN ShareLink 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other MTN ShareLink Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of MTN ShareLink Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to MTN ShareLink router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the MTN ShareLink Router To Default Settings?

If you can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change MTN ShareLink Default Wifi Name (SSID)

By default, some MTN ShareLink routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for MTN ShareLink

MAC filtering allows you to restrict access to your MTN ShareLink router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your MTN ShareLink router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for MTN ShareLink router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

5 × four =