To get access to Net-Lynx Vulcan router, you need the login IP address of your router, the username, and password.
You can find these info in Net-Lynx Vulcan router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Net-Lynx Vulcan Router
The Net-Lynx Vulcan has a web interface for configuration. You can use any web browser to log in to the Net-Lynx Vulcan router.
Put the Login IP Address of your Net-Lynx Vulcan in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Net-Lynx Vulcan login infomation.
Default login data for Net-Lynx Vulcan
You need to know the username and password to log in to your Net-Lynx Vulcan router. We listed below.
|Model||Ip||Username & Password|
|Net-Lynx Vulcan||192.168.1.1||Username:root/ Password:root|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Net-Lynx Vulcan Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Net-Lynx Vulcan Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Net-Lynx Vulcan router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the Net-Lynx Vulcan Router To Default Settings?
If you can’t access the router’s setup page, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Net-Lynx Vulcan Default Wifi Name (SSID)
By default, some Net-Lynx Vulcan routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Net-Lynx Vulcan
MAC filtering allows you to restrict access to your Net-Lynx Vulcan router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Net-Lynx Vulcan router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for Net-Lynx Vulcan router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.