Default Password for Netcomm MyZone 3G24W Router

To get access to Netcomm MyZone 3G24W router, you need the login IP address of your router, the username, and password.

You can find these information in Netcomm MyZone 3G24W router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Netcomm MyZone 3G24W Router

The Netcomm MyZone 3G24W has a web interface for configuration. You can use any web browser to log in to the Netcomm MyZone 3G24W router.

Put the Internal IP Address of your Netcomm MyZone 3G24W in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netcomm MyZone 3G24W login username & password.

Default login data for Netcomm MyZone 3G24W

You need to know the username and password to log in to your Netcomm MyZone 3G24W router. We listed below.

Model Ip Username & Password
Netcomm MyZone 3G24W 192.168.1.1 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netcomm MyZone 3G24W Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Netcomm MyZone 3G24W Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Netcomm MyZone 3G24W router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the Netcomm MyZone 3G24W Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Netcomm MyZone 3G24W Default Wifi Name (SSID)

By default, some Netcomm MyZone 3G24W routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netcomm MyZone 3G24W

MAC filtering allows you to restrict access to your Netcomm MyZone 3G24W router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netcomm MyZone 3G24W router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Netcomm MyZone 3G24W router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

5 + 9 =