Default Password for Netgear AirCard 770s Router

To get access to Netgear AirCard 770s router, you need the login IP address of your router, the username, and password.

You can find these data in Netgear AirCard 770s router manual. But if you lost it, then you can use the quick guide below.

Login to the Netgear AirCard 770s Router

The Netgear AirCard 770s has a web interface for configuration. You can use any web browser to log in to the Netgear AirCard 770s router.

Put the Login IP Address of your Netgear AirCard 770s in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear AirCard 770s login data.

Default login data for Netgear AirCard 770s

You need to know the username and password to log in to your Netgear AirCard 770s router. We listed below.

Model Ip Username & Password
Netgear AirCard 770s 192.168.1.1 Username:attadmin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netgear AirCard 770s Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Netgear AirCard 770s Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Netgear AirCard 770s router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Netgear AirCard 770s Router To Default Settings?

If you still can not login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Netgear AirCard 770s Default Wifi Name (SSID)

By default, some Netgear AirCard 770s routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netgear AirCard 770s

MAC filtering allows you to restrict access to your Netgear AirCard 770s router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear AirCard 770s router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Netgear AirCard 770s router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

15 − 10 =