Default Password for Netgear C3700-100NAS Router

To get access to Netgear C3700-100NAS router, you need the login IP address of your router, the username, and password.

You can find these data in Netgear C3700-100NAS router manual. But if you lost it, then you can use the quick guide below.

Login to the Netgear C3700-100NAS Router

The Netgear C3700-100NAS has a web interface for configuration. You can use any web browser to log in to the Netgear C3700-100NAS router.

Put the Internal IP Address of your Netgear C3700-100NAS in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear C3700-100NAS login username & password.

Default login data for Netgear C3700-100NAS

You need to know the username and password to log in to your Netgear C3700-100NAS router. We listed below.

Model Ip Username & Password
Netgear C3700-100NAS Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netgear C3700-100NAS Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Netgear C3700-100NAS Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Netgear C3700-100NAS router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Netgear C3700-100NAS Router To Default Settings?

If you can’t access the router’s setup page, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Netgear C3700-100NAS Default Wifi Name (SSID)

By default, some Netgear C3700-100NAS routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netgear C3700-100NAS

MAC filtering allows you to restrict access to your Netgear C3700-100NAS router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear C3700-100NAS router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Netgear C3700-100NAS router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

5 × two =