To get access to Netgear C6300BD router, you need the login IP address of your router, the username, and password.
You can find these information in Netgear C6300BD router manual. But if you lost it, then you can use the quick guide below.
Login to the Netgear C6300BD Router
The Netgear C6300BD has a web interface for configuration. You can use any web browser to log in to the Netgear C6300BD router.
Put the Login IP Address of your Netgear C6300BD in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear C6300BD login data.
Default login data for Netgear C6300BD
You need to know the username and password to log in to your Netgear C6300BD router. We listed below.
|Model||Ip||Username & Password|
|Netgear C6300BD||192.168.0.1||Username:admin/ Password:password|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Netgear C6300BD Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of Netgear C6300BD Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Netgear C6300BD router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the Netgear C6300BD Router To Default Settings?
If you still can’t get logged in, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Netgear C6300BD Default Wifi Name (SSID)
By default, some Netgear C6300BD routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Netgear C6300BD
MAC filtering allows you to restrict access to your Netgear C6300BD router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear C6300BD router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.0.1 on the address.
- Enter the username and password for Netgear C6300BD router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.