Default Password for Netgear CBVG834G Router

To get access to Netgear CBVG834G router, you need the login IP address of your router, the username, and password.

You can find these info in Netgear CBVG834G router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Netgear CBVG834G Router

The Netgear CBVG834G has a web interface for configuration. You can use any web browser to log in to the Netgear CBVG834G router.

Put the Internal IP Address of your Netgear CBVG834G in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear CBVG834G login data.

Default login data for Netgear CBVG834G

You need to know the username and password to log in to your Netgear CBVG834G router. We listed below.

Model Ip Username & Password
Netgear CBVG834G 192.168.0.1 Username:admin/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netgear CBVG834G Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Netgear CBVG834G Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Netgear CBVG834G router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Netgear CBVG834G Router To Default Settings?

If you can not get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Netgear CBVG834G Default Wifi Name (SSID)

By default, some Netgear CBVG834G routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netgear CBVG834G

MAC filtering allows you to restrict access to your Netgear CBVG834G router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear CBVG834G router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Netgear CBVG834G router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

five × one =