Default Password for Netgear FSM7328S Router

To get access to Netgear FSM7328S router, you need the login IP address of your router, the username, and password.

You can find these information in Netgear FSM7328S router manual. But if you lost it, then you can use the quick guide below.

Login to the Netgear FSM7328S Router

The Netgear FSM7328S has a web interface for configuration. You can use any web browser to log in to the Netgear FSM7328S router.

Put the IP Address(without “http://” or “https://”) of your Netgear FSM7328S in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear FSM7328S login username & password.

Default login data for Netgear FSM7328S

You need to know the username and password to log in to your Netgear FSM7328S router. We listed below.

Model Ip Username & Password
Netgear FSM7328S 192.168.0.1 Username:admin/ Password:(none)

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netgear FSM7328S Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Netgear FSM7328S Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Netgear FSM7328S router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Netgear FSM7328S Router To Default Settings?

If you still can not access the router’s setup page, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Netgear FSM7328S Default Wifi Name (SSID)

By default, some Netgear FSM7328S routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netgear FSM7328S

MAC filtering allows you to restrict access to your Netgear FSM7328S router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear FSM7328S router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Netgear FSM7328S router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

  2. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

one + twelve =