To get access to Netgear MBR-1515 router, you need the login IP address of your router, the username, and password.
You can find these data in Netgear MBR-1515 router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Netgear MBR-1515 Router
The Netgear MBR-1515 has a web interface for configuration. You can use any web browser to log in to the Netgear MBR-1515 router.
Put the Internal IP Address of your Netgear MBR-1515 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netgear MBR-1515 login username & password.
Default login data for Netgear MBR-1515
You need to know the username and password to log in to your Netgear MBR-1515 router. We listed below.
|Model||Ip||Username & Password|
|Netgear MBR-1515||192.168.0.1||Username:admin/ Password:password|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Netgear MBR-1515 Login Problems
If you can’t get a login to your router, here are some possible solutions you can try.
The Password of Netgear MBR-1515 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Netgear MBR-1515 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Netgear MBR-1515 Router To Default Settings?
If you can’t access the router’s setup page, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.
Change Netgear MBR-1515 Default Wifi Name (SSID)
By default, some Netgear MBR-1515 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Netgear MBR-1515
MAC filtering allows you to restrict access to your Netgear MBR-1515 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netgear MBR-1515 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.0.1 on the address.
- Enter the username and password for Netgear MBR-1515 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.