Default Password for Netopia 3387WG-VGx Router

To get access to Netopia 3387WG-VGx router, you need the login IP address of your router, the username, and password.

You can find these data in Netopia 3387WG-VGx router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Netopia 3387WG-VGx Router

The Netopia 3387WG-VGx has a web interface for configuration. You can use any web browser to log in to the Netopia 3387WG-VGx router.

Put the Login IP Address of your Netopia 3387WG-VGx in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Netopia 3387WG-VGx login username & password.

Default login data for Netopia 3387WG-VGx

You need to know the username and password to log in to your Netopia 3387WG-VGx router. We listed below.

Model Ip Username & Password
Netopia 3387WG-VGx Username:admin/ Password:1234

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Netopia 3387WG-VGx Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Netopia 3387WG-VGx Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Netopia 3387WG-VGx router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Netopia 3387WG-VGx Router To Default Settings?

If you can not get logged in, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Netopia 3387WG-VGx Default Wifi Name (SSID)

By default, some Netopia 3387WG-VGx routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Netopia 3387WG-VGx

MAC filtering allows you to restrict access to your Netopia 3387WG-VGx router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Netopia 3387WG-VGx router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Netopia 3387WG-VGx router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

5 × two =