To get access to Nucom NC-WR644GACV router, you need the login IP address of your router, the username, and password.
You can find these data in Nucom NC-WR644GACV router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the Nucom NC-WR644GACV Router
The Nucom NC-WR644GACV has a web interface for configuration. You can use any web browser to log in to the Nucom NC-WR644GACV router.
Put the Internal IP Address of your Nucom NC-WR644GACV in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Nucom NC-WR644GACV login infomation.
Default login data for Nucom NC-WR644GACV
You need to know the username and password to log in to your Nucom NC-WR644GACV router. We listed below.
|Model||Ip||Username & Password|
|Nucom NC-WR644GACV||192.168.0.1||Username:admin/ Password:NuCom|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Nucom NC-WR644GACV Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of Nucom NC-WR644GACV Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to Nucom NC-WR644GACV router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the Nucom NC-WR644GACV Router To Default Settings?
If you can’t login the setup page of router, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Nucom NC-WR644GACV Default Wifi Name (SSID)
By default, some Nucom NC-WR644GACV routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Nucom NC-WR644GACV
MAC filtering allows you to restrict access to your Nucom NC-WR644GACV router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Nucom NC-WR644GACV router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.0.1 on the address.
- Enter the username and password for Nucom NC-WR644GACV router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.