Default Password for Nucom R5000UN Router

To get access to Nucom R5000UN router, you need the login IP address of your router, the username, and password.

You can find these info in Nucom R5000UN router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the Nucom R5000UN Router

The Nucom R5000UN has a web interface for configuration. You can use any web browser to log in to the Nucom R5000UN router.

Put the IP Address(without “http://” or “https://”) of your Nucom R5000UN in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Nucom R5000UN login infomation.

Default login data for Nucom R5000UN

You need to know the username and password to log in to your Nucom R5000UN router. We listed below.

Model Ip Username & Password
Nucom R5000UN 192.168.1.1 Username:admin/ Password:routers MAC address

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Nucom R5000UN Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of Nucom R5000UN Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Nucom R5000UN router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Nucom R5000UN Router To Default Settings?

If you still can’t login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Nucom R5000UN Default Wifi Name (SSID)

By default, some Nucom R5000UN routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Nucom R5000UN

MAC filtering allows you to restrict access to your Nucom R5000UN router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Nucom R5000UN router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for Nucom R5000UN router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

6 + thirteen =