Default Password for OCE TDS320 Router

To get access to OCE TDS320 router, you need the login IP address of your router, the username, and password.

You can find these info in OCE TDS320 router manual. But if you lost it, then you can use the quick guide below.

Login to the OCE TDS320 Router

The OCE TDS320 has a web interface for configuration. You can use any web browser to log in to the OCE TDS320 router.

Put the Login IP Address of your OCE TDS320 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your OCE TDS320 login infomation.

Default login data for OCE TDS320

You need to know the username and password to log in to your OCE TDS320 router. We listed below.

Model Ip Username & Password
OCE TDS320 Username:System Administrator/ Password:SysAdm

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other OCE TDS320 Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of OCE TDS320 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to OCE TDS320 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the OCE TDS320 Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change OCE TDS320 Default Wifi Name (SSID)

By default, some OCE TDS320 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for OCE TDS320

MAC filtering allows you to restrict access to your OCE TDS320 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your OCE TDS320 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for OCE TDS320 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

20 + five =