Default Password for OTE Speedport Plus Router

To get access to OTE Speedport Plus router, you need the login IP address of your router, the username, and password.

You can find these information in OTE Speedport Plus router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the OTE Speedport Plus Router

The OTE Speedport Plus has a web interface for configuration. You can use any web browser to log in to the OTE Speedport Plus router.

Put the Internal IP Address of your OTE Speedport Plus in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your OTE Speedport Plus login infomation.

Default login data for OTE Speedport Plus

You need to know the username and password to log in to your OTE Speedport Plus router. We listed below.

Model Ip Username & Password
OTE Speedport Plus 192.168.1.1 Username:admin/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other OTE Speedport Plus Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of OTE Speedport Plus Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to OTE Speedport Plus router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the OTE Speedport Plus Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change OTE Speedport Plus Default Wifi Name (SSID)

By default, some OTE Speedport Plus routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for OTE Speedport Plus

MAC filtering allows you to restrict access to your OTE Speedport Plus router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your OTE Speedport Plus router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for OTE Speedport Plus router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.

5 comments

  1. Hello, do you know to set/change reset time of the router Speedport Plus manually in his seetings? It resets every day around 3-4pm. Tried to unplugg it from power and wait. Plugged it again after time. Same thing happend again. Any advice? Thanks.

    1. Hi, Niko. Although I have not used this router, I will try hard reset it when I encounter the most difficult troubleshooting router. There should be a small button or cavity on your router which will be labeled RESET, try to start it. It will do this while powered on and will bring your router back to its factory state, and of course, you will be logged in using the default admin account and password. And the hard reset will also reset all settings, which I think it will help you.

Leave a comment

Your email address will not be published.

10 − seven =