Default Password for OTE Speedport W 724V Router

To get access to OTE Speedport W 724V router, you need the login IP address of your router, the username, and password.

You can find these info in OTE Speedport W 724V router manual. But if you lost it, then you can use the quick guide below.

Login to the OTE Speedport W 724V Router

The OTE Speedport W 724V has a web interface for configuration. You can use any web browser to log in to the OTE Speedport W 724V router.

Put the Login IP Address of your OTE Speedport W 724V in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your OTE Speedport W 724V login username & password.

Default login data for OTE Speedport W 724V

You need to know the username and password to log in to your OTE Speedport W 724V router. We listed below.

Model Ip Username & Password
OTE Speedport W 724V 192.168.1.1 Username:(none)/ Password:on the rear panel of the device

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other OTE Speedport W 724V Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of OTE Speedport W 724V Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to OTE Speedport W 724V router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the OTE Speedport W 724V Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change OTE Speedport W 724V Default Wifi Name (SSID)

By default, some OTE Speedport W 724V routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for OTE Speedport W 724V

MAC filtering allows you to restrict access to your OTE Speedport W 724V router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your OTE Speedport W 724V router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for OTE Speedport W 724V router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

five × three =