Default Password for Ovislink AirLive WT-2000R Router

To get access to Ovislink AirLive WT-2000R router, you need the login IP address of your router, the username, and password.

You can find these info in Ovislink AirLive WT-2000R router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Ovislink AirLive WT-2000R Router

The Ovislink AirLive WT-2000R has a web interface for configuration. You can use any web browser to log in to the Ovislink AirLive WT-2000R router.

Put the IP Address(without “http://” or “https://”) of your Ovislink AirLive WT-2000R in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ovislink AirLive WT-2000R login data.

Default login data for Ovislink AirLive WT-2000R

You need to know the username and password to log in to your Ovislink AirLive WT-2000R router. We listed below.

Model Ip Username & Password
Ovislink AirLive WT-2000R 192.168.1.254 Username:admin/ Password:airlive

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ovislink AirLive WT-2000R Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of Ovislink AirLive WT-2000R Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Ovislink AirLive WT-2000R router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Ovislink AirLive WT-2000R Router To Default Settings?

If you still can’t get logged in, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Ovislink AirLive WT-2000R Default Wifi Name (SSID)

By default, some Ovislink AirLive WT-2000R routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ovislink AirLive WT-2000R

MAC filtering allows you to restrict access to your Ovislink AirLive WT-2000R router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ovislink AirLive WT-2000R router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Ovislink AirLive WT-2000R router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

15 − seven =