Default Password for Ovislink DV711C Router

To get access to Ovislink DV711C router, you need the login IP address of your router, the username, and password.

You can find these data in Ovislink DV711C router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Ovislink DV711C Router

The Ovislink DV711C has a web interface for configuration. You can use any web browser to log in to the Ovislink DV711C router.

Put the Login IP Address of your Ovislink DV711C in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ovislink DV711C login infomation.

Default login data for Ovislink DV711C

You need to know the username and password to log in to your Ovislink DV711C router. We listed below.

Model Ip Username & Password
Ovislink DV711C 192.168.1.254 Username:user/ Password:password

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ovislink DV711C Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Ovislink DV711C Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Ovislink DV711C router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Ovislink DV711C Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Ovislink DV711C Default Wifi Name (SSID)

By default, some Ovislink DV711C routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ovislink DV711C

MAC filtering allows you to restrict access to your Ovislink DV711C router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ovislink DV711C router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Ovislink DV711C router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

twenty − ten =