Default Password for Ovislink EVO-WR54ADSL Router

To get access to Ovislink EVO-WR54ADSL router, you need the login IP address of your router, the username, and password.

You can find these info in Ovislink EVO-WR54ADSL router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Ovislink EVO-WR54ADSL Router

The Ovislink EVO-WR54ADSL has a web interface for configuration. You can use any web browser to log in to the Ovislink EVO-WR54ADSL router.

Put the Login IP Address of your Ovislink EVO-WR54ADSL in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ovislink EVO-WR54ADSL login infomation.

Default login data for Ovislink EVO-WR54ADSL

You need to know the username and password to log in to your Ovislink EVO-WR54ADSL router. We listed below.

Model Ip Username & Password
Ovislink EVO-WR54ADSL 192.168.0.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Ovislink EVO-WR54ADSL Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of Ovislink EVO-WR54ADSL Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to Ovislink EVO-WR54ADSL router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Ovislink EVO-WR54ADSL Router To Default Settings?

If you can not login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change Ovislink EVO-WR54ADSL Default Wifi Name (SSID)

By default, some Ovislink EVO-WR54ADSL routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Ovislink EVO-WR54ADSL

MAC filtering allows you to restrict access to your Ovislink EVO-WR54ADSL router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ovislink EVO-WR54ADSL router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for Ovislink EVO-WR54ADSL router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

  2. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

19 − five =