To get access to Ozenda 11g Wireless router, you need the login IP address of your router, the username, and password.
You can find these data in Ozenda 11g Wireless router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the Ozenda 11g Wireless Router
The Ozenda 11g Wireless has a web interface for configuration. You can use any web browser to log in to the Ozenda 11g Wireless router.
Put the IP Address(without “http://” or “https://”) of your Ozenda 11g Wireless in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Ozenda 11g Wireless login infomation.
Default login data for Ozenda 11g Wireless
You need to know the username and password to log in to your Ozenda 11g Wireless router. We listed below.
|Model||Ip||Username & Password|
|Ozenda 11g Wireless||192.168.2.1||Username:(none)/ Password:(none)|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other Ozenda 11g Wireless Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of Ozenda 11g Wireless Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to Ozenda 11g Wireless router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the Ozenda 11g Wireless Router To Default Settings?
If you can’t get logged in, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change Ozenda 11g Wireless Default Wifi Name (SSID)
By default, some Ozenda 11g Wireless routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for Ozenda 11g Wireless
MAC filtering allows you to restrict access to your Ozenda 11g Wireless router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Ozenda 11g Wireless router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.2.1 on the address.
- Enter the username and password for Ozenda 11g Wireless router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.