Default Password for Pace Plc 3800HGV-B Router

To get access to Pace Plc 3800HGV-B router, you need the login IP address of your router, the username, and password.

You can find these data in Pace Plc 3800HGV-B router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the Pace Plc 3800HGV-B Router

The Pace Plc 3800HGV-B has a web interface for configuration. You can use any web browser to log in to the Pace Plc 3800HGV-B router.

Put the Login IP Address of your Pace Plc 3800HGV-B in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Pace Plc 3800HGV-B login username & password.

Default login data for Pace Plc 3800HGV-B

You need to know the username and password to log in to your Pace Plc 3800HGV-B router. We listed below.

Model Ip Username & Password
Pace Plc 3800HGV-B 192.168.1.254 Username:(none)/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Pace Plc 3800HGV-B Login Problems

If you not be able to get a login to your router, here are some possible solutions you can try.

The Password of Pace Plc 3800HGV-B Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Pace Plc 3800HGV-B router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the Pace Plc 3800HGV-B Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change Pace Plc 3800HGV-B Default Wifi Name (SSID)

By default, some Pace Plc 3800HGV-B routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Pace Plc 3800HGV-B

MAC filtering allows you to restrict access to your Pace Plc 3800HGV-B router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Pace Plc 3800HGV-B router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for Pace Plc 3800HGV-B router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

four × 4 =